Trace Heating Cables | Chromalox
Chromalox cables provide trace heating to commercial, industrial and hazardous area location pipework, tanks, vessels and drums – ATEX certified heating cables are available for safe installation to process pipework requiring temperature maintenance in Zone 1 and Zone 2 hazardous areas.
Contact T&D to discuss your heat tracing cable and system requirements – we are Approved Distributors for Chromalox and can provide full trace heating system design and heat loss calculations for both frost protection and temperature maintenance heating applications.
We guarantee excellent customer service and fast delivery of Chromalox cables from extensive stocks at the most competitive prices.
|Chromalox Heat Trace Cables||Cable Size||Watts Per Foot||Cable Voltage||Process Temperature Maintenance||Hazardous Area Certifications||Heating Cable Circuit Length||Cable|
|SRL Self Regulating Trace Heating Cable||3/8″ Width x 1/8″ Height||3, 5, 8 and 10||120V and 208-277V||Up to 150° F (65° Celsius)||ATEX CSA FM GOST IECEx UL||660 Feet|
|SRP Self Regulating Trace Heating Cable||3/8″ Width x 1/8″ Height||5, 10 and 15||120V and 208-277V||Up to 275ºF (135º Celsius)||ATEX CSA FM UL||750 Feet|
|SRME Self Regulating Trace Heating Cable||3/8″ Width x 1/8″ Height||3, 5, 8, 10, 15 and 20||120V and 208-277V||Up to 420ºF (215º Celsius)||ATEX IECEx CSA FM UL||750 Feet|
|CWM Trace Constant Wattage Heating Cable||3/8″ Width x 1/8″ Height||4, 8 and 12||120V, 208-277V and 480V||Up to 392ºF (200º Celsius)||CSA UL||780 Feet|
|SRF-RG Self Regulating Trace Heating Cable||3/8″ Width x 1/8″ Height||12||120V and 208-277V||Up to 150° F (65° Celsius)||CSA UL||540 Feet|
|HSRL Self Regulating Trace Heating Cable||3/8″ Width x 1/8″ Height||3, 5, 8 and 10||120V and 208-277V||Up to 150° F (65° Celsius)||CSA FM||660 Feet|
|HSRM Self Regulating Trace Heating Cable||3/8″ Width x 1/8″ Height||5, 8, 10, 15 and 20||120V and 208-277V||Up to 420ºF (215º Celsius)||CSA FM||750 Feet|
|MI Mineral Insulated Heating Cable||3/16″ to 5/16″||Up to 80||120V – 600V||Up to 1100ºF (593º Celsius)||CSA FM||500 Feet|
|HWM Hot Water Maintenance Cable||3/8″ Width x 1/8″ Height||5 and 10||120V and 208-277V||Up to 140ºF (60º Celsius)||N/A||800 Feet|
|SLL Long Line Trace Heating Cable||3/8″ Width x 1/8″ Height||Up to 12||120V – 600V||Up to 450ºF (232º Celsius)||N/A||7,500 Feet|
|SRF Self Regulating Trace Heating Cable||3/8″ Width x 1/8″ Height||3, 5 and 8||120V and 208-277V||Up to 185ºF (85º Celsius)||CSA, UL||660 Feet|
Chromalox Trace Heating Cables
A video overview of Chromalox trace heating cables and products – T&D can provide training and advice of the installation Chromalox cables.
Chromalox technical manual documenting heating cable selection, design, heat loss calculations and heat transfer fundamentals and radiant infrared heating theory. Should you require any technical support please do not hesitate to contact T&D.
Heat Tracing Cables
Heat tracing is the process of applying electrical heat to provide process temperature maintenance of pipes (containing viscous fluids prone to hardening, congealing or gelling). The heating cable can be linearly or helically installed on the external surface of the pipework and then thermal insulation or lagging is fitted over the heat trace cable to reduce heat losses.
Similarly, heating cables can be used to provide frost protection to water pipework at risk of freezing during winter – furthermore roof/gutter heating and ramp heating systems can be specified to prevent snow and ice build-up and formation.
➡ For complete information about Chromalox Cables please refer to the product sections below – heat trace cables in self-regulating, constant wattage or mineral insulated (MI) technology are available to suit all types of pipework (plastic, metallic, stainless steel), workplace location (non-hazardous or hazardous area) and process temperature heating up to 593° Celsius.