ASCO 284 Solenoid Valves – 2 Way Pinch Valve (Highly Corrosive Fluids)
ASCO 284 solenoid valves. T&D are an ASCO Numatics Authorised Distribution Channel.
ASCO 284 solenoid valves are part of the ASCO Red Hat range of valves.
- Manufacturer : ASCO
- Product : Solenoid Valve
- Type : Pinch
- Series : ASCO 284
- Valve Body : Anodized Aluminum
- Valve Voltage : 12, 24 VDC +10%, -5%
- Flow Control Media : Air:Inert Gas, Water, Oil, Liquids – corrosively aggressive media
- Valve Function : Normally Closed, Normally Opened – 2 Way: 2/2
NC = Normally Closed Valve
NO = Normally Opened Valve
ASCO 284 SOLENOID VALVES – FEATURES
- Large open gap for high flow and handling of particulate media
- Zero dead volume prevents cross-contamination
- Electrical connections can be kept separate from fluid area via built-in panel mount bracket
- Built-in manual operator for easy tubing change out and testing
- Removable/Rotatable coil for easy service and installation
Typical applications of the ASCO 284 solenoid valves include in medical equipment, analytical instruments, food and industrial applications.
ASCO 284 Solenoid Valves – Product Construction
Valve Parts in Contact with Fluids | |
Recommended Tubing | VMQ (Silicone), max. hardness 50 Shore A (Not supplied with valve) |
Body | Anodized Aluminum |
Pinch Mechanism | POM (reinforced acetal copolymer) |
Internal Solenoid Parts | Stainless Steel |
Core Tube | Nickel plated brass |
ASCO 284 Solenoid Valves – Electrical Characteristics
Standard Voltage | 12, 24 VDC +10%, -5% |
Power Consumption | 4, 9, 13 Watts |
Duty Cycle Rating | Continuous |
Coil Insulation | Class F |
Ambient Temperature | 14˚F to 140˚F (-10˚C to 60˚C) |
Electrical Connection | DIN Spade Terminals |
DIN Connectors (not included with valve) | |
– 4 Watt Coil | Size 9.4 mm, Form C |
– 9 Watt Coil | Size 18 mm, Form A |
– 13 Watt Coil | Size 18 mm, Form A |
Protection Rating | IP65 with DIN Plug Connector |
ASCO SOLENOID VALVES – HAZARDOUS AREA LOCATIONS, safety & standards
ASCO solenoid valves (2-way, 3-way and 4-way type including NAMUR interfaces) control the critical flow of air, gas, water, oil and steam across all industries – hazardous area solenoid valves are available for Division and Zone classifications.
Class I, Division 2 and Zone 1/Zone 2 approved solenoid valves according to ATEX, IECEx, FM, CSA and UL are available. Flameproof and explosion-proof valves can be specified for potentially explosive atmospheres where there is a presence of flammable liquids, gases or vapours.
ASCO valves improve reliability and performance of safety systems according to IEC 61508, IEC 61511 and Safety Integrity Levels (SIL) – ASCO spool valves with SIL 4 capability are SAEL listed as assessed by Exida and TÜV.
➡ Did you know? T&D Exports support the global oil, gas and petrochemical industries providing a single-source supply capability of Hazardous Area Equipment across Electrical, Mechanical, Process & Instrumentation ranges.