ASCO X214 Solenoid Valves – Gas Shutoff Valves (12 & 24VDC DC Construction)

ASCO X214 solenoid valve. T&D are an ASCO Numatics Authorised Distribution Channell.

ASCO X214 solenoid valves are part of the ASCO Red Hat range of valves.

ASCO X214 solenoid valve features a high-force closing spring provides positive shutoff for reverse pressure up to 15″ WC.

With a broad ambient temperature range of: -40°F to 140°F (-40°C to 60°C), the ASCO X214 solenoid valve features a 2-way, normally closed operation

ASCO X214 solenoid has a 2-way normally closed operation and are manufactured from high flow die-cast aluminium bodies.

ASCO X214 Solenoid Valves – Product Benefits

DC construction (12 & 24 VDC)
High-force closing spring provides positive shutoff for reverse pressure up to 15″ W.C.
Low Power 24 VDC Peak & Hold: Reduces energy consumption to 3.2 W (Hold). Ideal for remote power-critical installations (2″ High Flow to 3″)
Broad ambient temperature range: -40˚F to 140˚F (-40˚C to 60˚C)
2-way normally closed operation
Zero differential piloted diaphragm
High-flow die-cast aluminum bodies
1/8″ NPT pipe taps with plugs for routine testing
Optional flange adapters for ease of installation and service
For on/off control of fuel gas in emergency and standby power systems requiring a primary and alternate fuel source

ASCO X214 Solenoid Valves – Product Construction

Valve Parts In Contact With Fluids
Body	Aluminium
Seals And Disc	NBR
Core Bushing	PTFE Coated Fiberglass
Core, Bonnet And Plugnut	Zinc-plated fiberglass
Springs	302 stainless steel
Pipe Plug	zinc-plated steel
Pipe Seal	302 stainless steel

ASCO X214 Solenoid Valves – Electrical Characteristics

Standard Coil and Class of Insulation	Pipe Sizes (in)	Watt Rating (DC)			Ambient Temp. ˚F (˚C )	Spare Coil Family
		Standard	Peak Watts	Hold Watts		Open Frame	General Purpose
						DC	DC
H	3/4″ to 2″	45	–	–	-40 to 140 (-40 to 60)	236825	–
F	2″ High Flow to 3″	–	61	3.2		–	–
Standard DC Voltages: 12, 24 (3/4″ to 2″); 24 only (2″ High Flow to 3″)

ASCO SOLENOID VALVES – HAZARDOUS AREA LOCATIONS, safety & standards

ASCO solenoid valves (2-way, 3-way and 4-way type including NAMUR interfaces) control the critical flow of air, gas, water, oil and steam across all industries – hazardous area solenoid valves are available for Division and Zone classifications.

Class I, Division 2 and Zone 1/Zone 2 approved solenoid valves according to ATEX, IECEx, FM, CSA and UL are available. Flameproof and explosion-proof valves can be specified for potentially explosive atmospheres where there is a presence of flammable liquids, gases or vapours.

ASCO valves improve reliability and performance of safety systems according to IEC 61508, IEC 61511 and Safety Integrity Levels (SIL) – ASCO spool valves with SIL 4 capability are SAEL listed as assessed by Exida and TÜV.

➡ Did you know? T&D Exports support the global oil, gas and petrochemical industries providing a single-source supply capability of Hazardous Area Equipment across Electrical, Mechanical, Process & Instrumentation ranges.

Solenoid Valves ASCO