VEGA – World Leading Manufacturers Of Level & Pressure Sensors
VEGAFLEX81 level sensor provides a temperature operating range of -60 to 200°C and up to 75 metres measuring distance.
A large butchery requires the measurement of the level of ammonia in the storage room of its meat-packing facility. Level monitoring is required in the low-pressure receiving tank in the system.
The upper part of the tank contains ammonia vapour which is transformed into liquid form in the compressor before being pumped back into the tank.
When pumped back into the lower part of the tank the liquid ammonia passes through the cold storage room where it heats up and becomes ammonia vapour again. It rises to the top part of the tank and the cooling cycle begins again.
Monitoring the level of the liquid ammonia is particularly important for the operation of the system because if the liquid phase in the vessel gets too high, liquid ammonia would be sucked into the compressor, thereby causing serious damage.
The biggest challenges in this application arise from the special properties of ammonia, its relatively low dielectric constant and the process temperature of -30° C. In a gaseous state, ammonia can diffuse through standard industrial seals and destroy the electronics in the instrument housing within a very short time.
The VEGAFLEX 81 level sensor is used to measure the ammonia effectively.
VEGA VEGAFLEX 81 is an intrinsically safe sensor which can be equipped with a borosilicate glass feedthrough (second line of defense) for ammonia applications. This feedthrough is gas tight and resistant to ammonia vapour.
The temperature range of the sensor, -60 … +150° C, matches the requirements perfectly. The coaxial measuring probe protects the borosilicate glass feedthrough and is ideal for liquids with a low dielectric constant.
The VEGAFLEX 81 guided radar level sensor can be used for all liquids including bitumen and liquefied gas. It can be used for storage containers, standpipes, in a metering tank or in tank farms. The VEGAFLEX 81 measures the level or interface (separation layers) of liquids with great reliability and accuracy.
VEGA Level Sensor – VEGAFLEX 81 Guided Wave Radar Level Sensor
VEGA VEGAFLEX 81 guided wave radar level transmitter is available in hazardous area options to meet ATEX & IECEx directives.
Approval C: ATEX II 1G, 1/2G, 2G Ex ia IIC T6
Approval D: ATEX II 1G, 1/2G, 2G Ex d ia IIC T6
Approval E: ATEX II 1G, 1/2G, 2G Ex d IIC T6
Approval R: ATEX II 1D, 1/2D, 2D, IP6x T
Approval C: IECEx ia IIC T6
Approval D: IECEx d ia IIC T6
Approval E: IECEx d IIC T6
Approval R: IEC IP6x T tD
For more information click: VEGA Guided Wave Radar Level Measurement
Guided Wave Radar Level Measurement Using VEGA VEGAFLEX Sensors
Radar Level Measurement Using VEGA VEGAPULS Sensors
Thorne & Derrick International, based in the UK, distribute Explosion Proof & Hazardous Area Process Instrumentation Equipment (ATEX & IECEx Certified): this includes industrial measurement probes, humidity sensors, data loggers, handheld instruments and transmitters for temperature measurement and monitoring of relative humidity. Additionally, hazardous area instrumentation is also available for monitoring carbon dioxide, differential and process pressure, flow, dew point, water activity and analog signals.
Thorne & Derrick are inviting you to join LinkedIn’s fastest growing Discussion Group – Process & Hazardous Area Industries : Heat Tracing, Gas Detection, Fluid Control & Flow Measurement. News, projects, videos, promotions, whitepapers, jobs, webinars, press plus much more. 
ABOUT US
Thorne & Derrick International are your single-source supplier of Electrical, Mechanical, Process & Instrumentation Equipment. T&D provide an outstanding service to UK and international customers – we are highly customer responsive and absolutely committed to providing a world-class service.
T&D supply utilities, power, renewable energy, construction, rail, manufacturing, food/beverage, mining, oil, gas and petrochemical industries – distributing 100,000+ products from 100+ manufacturers from multi-million pound stocks. Since 1985 we have established a solid reputation based on service, integrity and trust.
Level Sensors
A guided wave radar level sensor utilising VEGA VEGAFLEX technology uses microwave pulses which are conducted along a cable or rod measuring probe. The measuring probe of the level sensor ensures that the signal reaches the medium undisturbed. The pulse signal is reflected by the mediums surface and is received by the processing electronics. This information is then used and converted into level information.
Level Sensors
The level of almost any liquid or solid can be measured using VEGA guided wave radar sensors. Guided radar is virtually unaffected by changes to product or process temperature, pressure, density, conductivity, vapours, build up or dust. No moving parts mean the radar level sensors are extremely reliable and eliminates the need for recalibration.
All guided wave radar sensors have built in linearisation software to calculate the level versus shape and provide direct output of volume on:-
VEGA are the worlds’ No.1 process radar manufacturer, with the experience of over 200,000 successful installations. In 1997 VEGA introduced the first two wire, loop powered radar to the market and are the established leaders in this field.
VEGAFLEX series of guided wave radar level sensors are usually mounted from the top. Calibration is easy and uses a small entry to the vessel (from ¾” BSP). VEGAFLEX is part of the plics® family:
Reliable
The following VEGA selection table provides an overview of the VEGAFLEX guided wave radar level sensors available – contact T&D Process & Instrumentation to discuss your level, pressure and temperature measurement requirements.
| Level Measurement Using Guided Wave Radar | VEGA VEGAFLEX Guided Wave Radar Level Sensor | Application | Measuring Distance | Measuring Pressure | Process Temperature | Process Pressure |
 |
VEGAFLEX 81 | Liquid level measurement including all liquids – applications with vapour, build-up, foam or condensation | 75 metres | – | -60 to 200°C | -1 to 40 bar |
 |
VEGAFLEX 82 | Level measurement of light and heavyweight bulk solids, applications with strong dust generation, condensation or buildup | 75 metres | – | -40 to 200 °C | -1 to 40 bar |
 |
VEGAFLEX 83 | Liquid level measurement of aggressive liquids or liquid media with highest hygienic requirements, applications with vapour, build-up, foam generation or condensation | 32 metres | – | -40 to 150°C | -1 to 16 bar |
 |
VEGAFLEX 86 | Level measurement of virtually all liquids under extreme pressure and temperature conditions, applications with build-up, foam generation or condensation | 75 metres | – | -196 to 450°C | -1 to 400 bar |
 |
VEGAFLEX 61 | Level Measurement | 32 metres | – | -40 to 150°C | -1 to 40 bar |
 |
VEGAFLEX 62 | Level Measurement | 60 metres | – | -40 to 150°C | -1 to 40 bar |
 |
VEGAFLEX 63 | Level Measurement | 32 metres | – | -40 to 150°C | 0.5 to 16 bar |
 |
VEGAFLEX 65 | Level Measurement | 6 metres | – | -40 to 150°C | -1 to 40 bar |
For more information on the VEGAFLEX series of level sensors or any of VEGA’s pressure and level measurement instrumentation please contact a T&D Technical Sales Engineer today.
T&D, Your Explosive Atmosphere Experts – making hazardous areas safe.
Radar Level Measurement Using VEGA VEGAPULS Sensors – How Does It Work?
Guided Wave Radar Level Measurement Using VEGA VEGAFLEX Sensors In The Recycling Industry
Thorne & Derrick International, based in the UK, distribute Explosion Proof & Hazardous Area Process Instrumentation Equipment (ATEX & IECEx Certified): this includes industrial measurement probes, humidity sensors, data loggers, handheld instruments and transmitters for temperature measurement and monitoring of relative humidity. Additionally, hazardous area instrumentation is also available for monitoring carbon dioxide, differential and process pressure, flow, dew point, water activity and analog signals.
Thorne & Derrick are inviting you to join LinkedIn’s fastest growing Discussion Group – Process & Hazardous Area Industries : Heat Tracing, Gas Detection, Fluid Control & Flow Measurement. News, projects, videos, promotions, whitepapers, jobs, webinars, press plus much more.
ABOUT US
Thorne & Derrick International are your single-source supplier of Electrical, Mechanical, Process & Instrumentation Equipment. T&D provide an outstanding service to UK and international customers – we are highly customer responsive and absolutely committed to providing a world-class service.
T&D supply utilities, power, renewable energy, construction, rail, manufacturing, food/beverage, mining, oil, gas and petrochemical industries – distributing 100,000+ products from 100+ manufacturers from multi-million pound stocks. Since 1985 we have established a solid reputation based on service, integrity and trust.
VEGA – The Level Sensors & Measurement Specialists
Level Sensors
A radar level measurement instrument uses microwave signals to determine the level of a liquid or solid.
The instrument is placed above the medium and emits a microwave signal which is reflected back to the sensor from the surface of the medium.
The radar level sensor uses this data to determine the distance to the product surface and is thus able to calculate the product level.
The radar level measurement technique is commonly used for measuring liquids and solids in the process industry – applications include process tanks, storage tanks and silos.
This non-contact form of level measurement, utilising VEGA VEGAPULS technology, mean the readings are not influenced by temperature, pressure or product properties.
Two different emission frequencies are available for the level measurement of liquids.
The compact, high-frequency K-band sensors VEGAPULS 61, 62 and 63 are particularly suitable for applications in which very high precision is required.
Excellent signal focusing is achieved even with small antenna sizes.
The low-frequency C-band sensors VEGAPULS 65 and 66, on the other hand, are better able to penetrate foam and strong condensate deposits and are thus suitable for especially difficult process conditions.
The high-frequency K-band sensors VEGAPULS 67 and 68 are applied for level measurement in bulk solids. Due to the excellent signal focussing, internal silo installations or build-up on the walls have no influence on the measurement.
The highly sensitive electronics, especially adapted to the requirements of bulk solids measurement, enables reliable level measurement of widely different products up to 75 metres.
Radar Level Sensors
The following VEGA selection table provides an overview of the VEGAPULS radar level sensors available – contact T&D Process & Instrumentation to discuss your level, pressure and temperature measurement requirements.
| Level Measurement Using Radar | VEGA VEGAPULS Radar Level Sensor | Application | Measuring Distance | Measuring Pressure | Process Temperature | Process Pressure |
 |
VEGAPULS 61 | Liquid level measurement | 35 metres | – | -40 to 80°C | -1 to 160 bar |
 |
VEGAPULS 62 | Liquid level measurement | 35 metres | – | -196 to 450°C | -1 to 160 bar |
 |
VEGAPULS 63 | Liquid level measurement (aggressive liquids and process conditions – hygienic and chemically stable applications) | 35 metres | – | -196 to 200°C | -1 to 16 bar |
 |
VEGAPULS 64 | Liquid level measurement for storage tanks, dosing and process vessels with different process conditions or hygienic requirements | 30 metres | – | -40 to 200°C | -1 to 20 bar |
 |
VEGAPULS 65 | Liquid level measurement of liquids despite foam – recommended for small process fittings | 35 metres | – | -40 to 150°C | -1 to 20 bar |
 |
VEGAPULS 66 | Liquid level measurement – including strongly agitated media | 35 metres | – | -60 to 400°C | -1 to 160 bar |
 |
VEGAPULS 67 | Liquid level measurement of bulk solids | 15 metres | – | -40 to 80°C | -1 to 2 bar |
 |
VEGAPULS 68 | Liquid level measurement of bulk solids | 75 metres | – | -196 to 450 °C | -1 to 160 bar |
T&D, Your Explosive Atmosphere Experts – making hazardous areas safe.
ATEX Level Sensors For Pressure & Level Measurement In The Petrochemical Industry
ATEX Transmitters For Hazardous Area Temperature & Humidity Measurement
Guided Wave Radar Level Measurement Using VEGA VEGAFLEX Sensors – How Does it Work?
Thorne & Derrick International, based in the UK, distribute Explosion Proof & Hazardous Area Process Instrumentation Equipment (ATEX & IECEx Certified): this includes industrial measurement probes, humidity sensors, data loggers, handheld instruments and transmitters for temperature measurement and monitoring of relative humidity. Additionally, hazardous area instrumentation is also available for monitoring carbon dioxide, differential and process pressure, flow, dew point, water activity and analog signals.
Thorne & Derrick are inviting you to join LinkedIn’s fastest growing Discussion Group – Process & Hazardous Area Industries : Heat Tracing, Gas Detection, Fluid Control & Flow Measurement. News, projects, videos, promotions, whitepapers, jobs, webinars, press plus much more.
ABOUT US
Thorne & Derrick International are your single-source supplier of Electrical, Mechanical, Process & Instrumentation Equipment. T&D provide an outstanding service to UK and international customers – we are highly customer responsive and absolutely committed to providing a world-class service.
T&D supply utilities, power, renewable energy, construction, rail, manufacturing, food/beverage, mining, oil, gas and petrochemical industries – distributing 100,000+ products from 100+ manufacturers from multi-million pound stocks. Since 1985 we have established a solid reputation based on service, integrity and trust.
Published 13 Mar 2020
Press Release Date: 02.04.2020 uploaded by Chris Dodds (T&D Sales + Marketing Manager) World’s First Fully Certified ATEX Doors Thorne & Derrick International, the Experts in Equipment for Explosive Atmospheres, today announce the signing of a Commercial Distribution Agreement...
Published 04 Jul 2019
Press Release Date: 04.07.2019 uploaded by Chris Dodds (T&D Sales + Marketing Manager) Category: Stockist Distributor Agreement Announcement Thorne & Derrick International announce that they have signed a Preferred Distributor Agreement with Raytec, the world leading manufacturer of LED...
