Hazardous Area Level Sensors
In addition to ATEX and IECEx Certification for their range of hazardous area level sensors and level switches, Deeter are now certified to CSA standards for Explosion Proof Accreditation.
CSA is the Canadian Standards Association which provides product testing and certification for a wide variety of electrical and mechanical products including level sensors for hazardous areas and locations.
Contact T&D for monitoring and level sensing of liquids – products with ATEX and IECEx certification are available including hazardous area float switches, liquid level sensors and load cells.
Learn more about Deeter.
Hazardous Area Classifications – CSA
In North America, hazardous area workplaces and locations have traditionally been defined by a combination of Classes and Divisions:
The U.S. and Canada have recently revised installation codes to recognize an international 3-Zone area classification system for equipment used in hazardous locations.
In Canada, all new installations must use the 3-Zone system – existing installations may continue to use the 2-Division system or opt to re-classify using the 3-Zone system.
In the U.S., all installations (both new and existing) can either continue using the 2-Division system or re-classify their product using the 3-Zone system.
Should you require any assistance selecting hazardous area level sensors for international classifications including ATEX, IECEx and CSA please do not hesitate to contact us.
Contact T&D to discuss your Hazardous Area Process Instrumentation requirements.
Deeter are a leading designer and manufacturer of electronic sensors and control systems for level measurement requirements and produce a range of explosion proof level sensors and float switches for use in hazardous area applications.
CSA approval, along with Deeter’s ATEX & IECEx certifications allows the Deeter LVCS FP level sensor and FS FP hazardous area float switch to be suitable for use in hazardous area applications in most regions worldwide.
Deeter ATEX & IECEX Certified Explosion Proof Range
Deeter LVCS-FP is a flameproof continuous liquid level sensor suitable for hazardous area applications and offers accurate level measurement using a magnetic float with a reed switch or Hall Effect sensor stem.Â
Deeter LVCS-FP level sensor is available in standard length sensor stems from 250mm to 2m and can be custom made to suit up to 4 metres.
Liquid Level & Float Sensors
The Deeter F/S- FP is a flameproof float switch suitable for hazardous area applications and offers flexible switching options using a magnetic float with a reed switch or Hall Effect sensor stem.
The F/S FP float switches are available in a number of standard length sensor stems – additionally up to 7 switch points can be fitted on one stem with a mix of normally open / normally closed switches to suit the application.
Explosion & Flameproof Liquid Level & Float Sensors
Both the LVCS FP level sensor and F/S FP float switch are suitable for hazardous area Zone 0, 1 and 2 applications and can be custom made to suit client requirements and still meet ATEX, IECEx and CSA directives.
Radar Level Measurement – How Does It Work?
Guided Wave Radar Level Sensor – How Does it Work?
Thorne & Derrick International, based in the UK, distribute Explosion Proof & Hazardous Area Process Instrumentation Equipment (ATEX & IECEx Certified): this includes industrial measurement probes, humidity sensors, data loggers, handheld instruments and transmitters for temperature measurement and monitoring of relative humidity. Additionally, hazardous area instrumentation is also available for monitoring carbon dioxide, differential and process pressure, flow, dew point, water activity and analog signals.
Thorne & Derrick are inviting you to join LinkedIn’s fastest growing Discussion Group – Process & Hazardous Area Industries : Heat Tracing, Gas Detection, Fluid Control & Flow Measurement. News, projects, videos, promotions, whitepapers, jobs, webinars, press plus much more. 
ABOUT US
See How T&D Support The Food & Beverage Industry
Thorne & Derrick International are your single-source supplier of Electrical, Mechanical, Process & Instrumentation Equipment. T&D provide an outstanding service to UK and international customers – we are highly customer responsive and absolutely committed to providing a world-class service.
T&D supply utilities, power, renewable energy, construction, rail, manufacturing, food/beverage, mining, oil, gas and petrochemical industries – distributing 100,000+ products from 100+ manufacturers from multi-million pound stocks. Since 1985 we have established a solid reputation based on service, integrity and trust.
Float Switches & Level Sensors
The Deeter Dual Level Controller is a cost effective solution for the control of pumps and valves enabling effective and accurate control of the liquid level in a tank between two or three set points. The pump or valve is controlled by integrated high power relay contacts.
The Dual Level Controller 2 has an additional relay which can be used for any purpose – such as a low level cut off valve or a high level alarm output. An IP65 version is available.
Deeter manufactures a large range of float switches that are compatible with the Dual Level Controller.
The Dual Level Controller allows control of the liquid level in a tank between two points and/or an extra control output in the event that the tank over or under fills.
The Dual Level Controller (DLC) provides safe low voltage for the level switches which may become submersed and has high power relay contacts to control a pump or a solenoid valve in a gravity fed top-up system.
T&D now provide liquid level sensors and control equipment from Deeter Electronics Ltd including their ATEX, IECEx & CSA approved hazardous area sensors.
Hazardous Area Level Sensors
Deeter are a leading designer and manufacturer of hazardous area level sensors, electronic sensors and control systems specialising in liquid level sensor solutions.
Hazardous Area Level Sensors & Float Switches – Deeter Gain CSA Approval
Thorne & Derrick are inviting you to join LinkedIn’s fastest growing Discussion Group – Process & Hazardous Area Industries : Heat Tracing, Gas Detection, Fluid Control & Flow Measurement. News, projects, videos, promotions, whitepapers, jobs, webinars, press plus much more.
ABOUT US
See How T&D Support The Food & Beverage Industry
Thorne & Derrick International are your single-source supplier of Electrical, Mechanical, Process & Instrumentation Equipment. T&D provide an outstanding service to UK and international customers – we are highly customer responsive and absolutely committed to providing a world-class service.
T&D supply utilities, power, renewable energy, construction, rail, manufacturing, food/beverage, mining, oil, gas and petrochemical industries – distributing 100,000+ products from 100+ manufacturers from multi-million pound stocks. Since 1985 we have established a solid reputation based on service, integrity and trust.
Clamp on flow meters use Transit Time and Doppler technologies for accurate flow measurement that is non-invasive. Both technologies require two transducers that are installed to the outer surface of the pipe. T&D together with Micronics are able to offer a range of clamp-on ultrasonic flow meter solutions using both Transit Time and Doppler technologies for a range of different applications.
One of the transducers transmits the ultrasonic signals whilst the other receives them.
These transducers are used to create pulses which pass through the pipe.
A clamp on flow meter can accurately measure the flow by calculating the differences in ultrasonic signals of the flowing liquid.
Installing Micronics U1000 Clamp On Flow Meter To Pipe
Micronics specialise in using these technologies to suit most liquid flow requirements.
The Micronics U1000 is a fixed clamp-on flow meter solution for measuring preset flow rate – l/m with a volume pulse output in litres and with a 4-20mA flow rate signal, which can be used as a stand alone meter or as an integral part of an aM&T or BEM’s system.
Micronics Ultraflo clamp on flow meters are simple to install as they easily clamp on to the pipe without requiring the use of any specialist tools.
The Micronics U1000 provides a non-invasive and cost effective flow measurement solution compared to an in-line meter option.
There is minimum downtime for installation or maintenance so there is no interruption to the process.
Compact, rugged and reliable, the U1000 clamp on flow meter has been designed to provide sustained performance in industrial environments.
Contact T&D today to discuss your clamp on flow meter requirements with one of our experienced sales engineers.
Micronics Portaflow 330 Portable Ultrasonic Flow Meter – NHS
Micronics U1000 Fixed Clamp On Heat Meter – A Smarter Solution To Thermal Energy Metering
Thorne & Derrick are inviting you to join LinkedIn’s fastest growing Discussion Group – Process & Hazardous Area Industries : Heat Tracing, Gas Detection, Fluid Control & Flow Measurement. News, projects, videos, promotions, whitepapers, jobs, webinars, press plus much more.
ABOUT US
Thorne & Derrick International are your single-source supplier of Electrical, Mechanical, Process & Instrumentation Equipment. T&D provide an outstanding service to UK and international customers – we are highly customer responsive and absolutely committed to providing a world-class service.
T&D supply utilities, power, renewable energy, construction, rail, manufacturing, food/beverage, mining, oil, gas and petrochemical industries – distributing 100,000+ products from 100+ manufacturers from multi-million pound stocks. Since 1985 we have established a solid reputation based on service, integrity and trust.
Hazardous Area Heating Specialists For Crane Cabins (Zone 1 Zone 2 ATEX Certified)
Ad: Portable Heaters For Hazardous Areas
For further info about hazardous area heaters for Crane Cabins click the links below.
Also: Plugs & Sockets | Lighting | Junction Boxes & Electrical Enclosures
Thorne & Derrick International distribute an extensive range of electrical heaters to provide crane cabin heating:
 Hazardous Area Air Warmers EXHEAT FAW |
 Hazardous Area Convector Heaters EXHEAT FCR |
 Hazardous Area Flameproof Radiators EXHEAT FLR |
 Hazardous Area Fan Heaters EXHEAT FUH |
 Hazardous Area Air Warmers EXHEAT FWD |
 Hazardous Area Air Warmer (Adjustable) EXHEAT FWD-T |
The heat trace cable ranges stocked and supplied by Thorne & Derrick International includes electric heating cables for process temperature maintenance, pipe and vessel freeze protection and roof and gutter de-icing applications where snow and ice removal is required – cables and systems are available for commercial, industrial safe area (non-hazardous area) and hazardous area heating applications with ATEX certification.
Electric heat tracing is a cable based system used to maintain, raise temperature and protect process pipework and vessels against freezing temperatures and associated frost damage – heat tracing cables mitigate and counteract cold weather effects as part of a Winterization strategy for industrial and process applications against low (sub-zero) ambient temperatures on both onshore and offshore locations.
Heat tracing systems utilising self-regulating, constant wattage and mineral insulated (MI) heating cables are available to provide the optimum electrical heating system for your application – we provide a trace heating system design service.
Heat Trace Cables: Ramp Heating | Roof & Gutter Heating | Water Pipework Frost Protection | Hopper Heating | Tank Heating | Hazardous Area Heating | Fire Escapes
Trace Heating & Heat Tracing Cable Systems Specialists | Thorne & DerrickHazardous Area Heating Specialists For Offshore Panel Heaters (Zone 1 Zone 2 ATEX Certified)
Ad: Portable Heaters For Hazardous Areas
For further info about hazardous area heaters for Offshore Panel Heaters click the links below.
Also: Plugs & Sockets | Lighting | Junction Boxes & Electrical Enclosures
Thorne & Derrick International distribute an extensive range of electrical heaters to provide offshore panel heater heating:
 Hazardous Area Air Warmers EXHEAT FWD |
 Hazardous Area Air Warmers EXHEAT FXE |
 Hazardous Area Air Warmers EXHEAT HEF |
The heat trace cable ranges stocked and supplied by Thorne & Derrick International includes electric heating cables for process temperature maintenance, pipe and vessel freeze protection and roof and gutter de-icing applications where snow and ice removal is required – cables and systems are available for commercial, industrial safe area (non-hazardous area) and hazardous area heating applications with ATEX certification.
Electric heat tracing is a cable based system used to maintain, raise temperature and protect process pipework and vessels against freezing temperatures and associated frost damage – heat tracing cables mitigate and counteract cold weather effects as part of a Winterization strategy for industrial and process applications against low (sub-zero) ambient temperatures on both onshore and offshore locations.
Heat tracing systems utilising self-regulating, constant wattage and mineral insulated (MI) heating cables are available to provide the optimum electrical heating system for your application – we provide a trace heating system design service.
Heat Trace Cables: Ramp Heating | Roof & Gutter Heating | Water Pipework Frost Protection | Hopper Heating | Tank Heating | Hazardous Area Heating | Fire Escapes
Trace Heating & Heat Tracing Cable Systems Specialists | Thorne & DerrickPublished 13 Mar 2020
Press Release Date: 02.04.2020 uploaded by Chris Dodds (T&D Sales + Marketing Manager) World’s First Fully Certified ATEX Doors Thorne & Derrick International, the Experts in Equipment for Explosive Atmospheres, today announce the signing of a Commercial Distribution Agreement...
Published 04 Jul 2019
Press Release Date: 04.07.2019 uploaded by Chris Dodds (T&D Sales + Marketing Manager) Category: Stockist Distributor Agreement Announcement Thorne & Derrick International announce that they have signed a Preferred Distributor Agreement with Raytec, the world leading manufacturer of LED...
